Home Photos & Descriptions Pricing and Order Form Links

Photos and Descriptions

If you use a single shot airgun, small caliber rimfire, or a studgun (tool used in construction) , you need this product -- the PELLETHOLDER.  The PELLETHOLDER is the only known after-market device that will hold pellets in the correct position near the chamber of your rifle or pistol for convenient, fast, quiet, one-hand loading. Keep your eye on the target! Load by feel! The PELLETHOLDER can be used with repeating guns to have more ammunition readily at hand. 

Straps to gunstock or to the user's arm with two velcro straps. Black straps, black pad on black plastic back. Approximate size; 3"x 4". Click here for pricing and order form.  

Models available:

Model # 1720 holds 20 each .177 or .20 cal. pellets.  (Approx. size 3" X 4")

Model #2225 holds 20 each .22 or .25 cal. pellets. (Approx. size 3" X 4")

Model # 22 CART holds 20 ea .22 cal cartridges. (Approx. size 3" X 4"), .425" thick pad

Model # N1720 holds 20 ea .177 or 20 cal pellets.. (Approx. size 2" X 6.5")

Model # N2225 holds 20 ea .22 or .25 cal pellets. (Approx. size 2" X 6.5")

Model # N 22 CART holds 20 ea .22 cal cartridges. (Approx. size 2" X 6.5"), .425" thick pad

Model # TAL 1720 holds 16 ea .177 or .20 cal pellets (for Talon) and is designed to fit the limited space and small diameter of an air tank/stock. (Approx. size 3" X 3.25")

Model # TAL 2225 holds 16 ea .22 or .25 cal pellets (for air tank/stock) (Approx. size 3" X 3.25")

Model # T 22 CART holds 16 ea .22 cal cartridges. (Approx. size 3" X 3.25"), .425" thick pad

Holds 20 pellets (or cartridges) in the correct position for convenient, fast, and quiet loading of a rifle or pistol.



The Pelletholder can also be
strapped to the rifle forearm
or to the user's arm.

 

 

Specify pad thickness on order form.

.250 inch for most .177 and .20 caliber pellets

.325 inch for most .22 and .25 caliber and .177 Predators, Silver Arrow

.425 inch for .22 Predator

You may need one of each.

You insert pellets into Pelletholder nose first
leaving the skirt out, flush with the pad surface.
Press the pad to gain grasp exactly as needed
to remove and load into your gun.
 

Other sizes, shapes, and calibers are available by custom order,  Just send an e-mail!  

pelletholder@aol.com

903-567-7151

Home                     Pricing and Order Form               Links


Copyright 2000-2014, David Phillips
950 VZCR 4204  Canton, TX 75103
All Rights Reserved.

Pelletholder, U S Patent # 6,374,719




Phillips Pellet Holder | Air Gun Ammo Holder | Airgun Hunting Accessories | Phillips Ammo Holder | Pellet Holders | Air Gun Hunting Accessories